The gas hob controls, Gas oven and electric grill control, Oven function control knob – Zanussi ZCG 640 User Manual

Page 5: Oven light push button, Grill function pilot light

Advertising
background image

5

The Gas Hob Controls

To light a burner:

- Push the electric ignition button which is marked with

a little spark ( ).

- At the same time push in and turn the relevant control

knob anticlockwise to maximum position.

- Then adjust the flame as required.
If the burner does not ignite, turn the control knob to
zero, and try again.

When switching on the mains, after installation or
a power cut, it is quite normal for the spark
generator to be activated automatically.

To ensure maximum burner efficiency, you should only
use pots and pans with a flat bottom fitting the size of
the burner used (see table).

Burner

minimum

maximum

diameter

diameter

Large (rapid)

180 mm.

260 mm.

Medium (semi-rapid)

120 mm.

220 mm.

Small (Auxiliary)

80 mm.

160 mm.

If you use a saucepan which is smaller than the
recommended size, the flame will spread beyond
the bottom of the pan, causing the handle to
overheat.

Oven Function Control Knob

Oven switched off

150-240

150-240

150-240

150-240

150-240

Range of temperature regulation for gas
oven

Grill - The heat comes only from the top
element

Grill function pilot light

The grill function pilot light will come on when the oven
function control knob is turned to

.

Oven light push button

This button will turn the oven light on.

Gas Oven and Electric Grill Control

As soon as a liquid starts boiling, turn down the
flame so that it will barely keep the liquid
simmering.

Take care when frying food in hot oil or fat, as
the overheated splashes could easily ignite.

If the control knobs become difficult to turn,
please contact your local Service Force Centre.

Advertising
This manual is related to the following products: