Xerox 6400 - Manual (Page 14)

Xerox 6400 Scanner User’s Guide 9
Installation
4. Plug the other end of the USB cable into the scanner’s USB
port.
You can also connect the scanner to a USB port on the
computer’s keyboard if it has one, or to a USB hub. If you use a
USB hub, it must have its own power supply already plugged
into an electrical outlet.
If the plug does not attach easily, make sure that you are
plugging it in correctly. Do not force the plug into the
connection.
If you are using Windows XP and have plugged the USB cable
into a USB 1.1 port, an information bubble opens explaining
that “A HI-SPEED USB device is plugged into a non-HI-SPEED
USB hub”. Plug the USB cable into a USB 2.0 port (if available)
or just disregard the message. If you leave it plugged into the
USB 1.1 port, your scanner may scan a bit slower than with a
USB 2.0 port.
5. Connect the power cord to the power supply.
NOTE: If you have not installed the software, unplug the USB
cable from the computer and install the software now. When the
software installation is complete, a message tells you to connect
the scanner.
USB
Power adapter plug
Power cord