Yamaha Magicstomp BASS EFFECTS PROCESSOR - Manual (Page 19)

19
U11:Studio
PRESS[STORE]1sec
Saving Patches
The name of the edited
patch
P01⁄Studio
ó‡CRATfiGAINáMSTR U01:Studio
PRESS[STORE]1sec
Destination patch
number for storing The name of the
edited patch
U11:Studio
PRESS[STORE]1sec U11¤Studio
NOW
0 STORING...
Store complete!
Press and hold
Destination patch
number for storing
● Saving the data to a different patch number
q
After you’re done editing, press the [STORE/EXIT] button.
w
Select the patch number to which you want to save the data.
Use the – or + switches to select the destination patch number to which you want to save your
data.
e
You can also give the patch a new name.
To change the name of the patch, follow steps
w
through
r
described on page 20.
r
Press and hold the [STORE/EXIT] button (about 1 second) until “NOW STOR-
ING...” appears on the display.
* To cancel the store operation, press and quickly release the [STORE/EXIT] button (within 1 second) and the
MAGICSTOMP returns to its original condition (the changed patch name returns to its original name).
Other than the patch name, any changes made to parameter data will be safe until another patch is selected.
In additions to creating and storing new patches, you can use the store operation to put
patches in the same order that you use them in performance making selection while
playing quick and convenient.