Xerox DocuColor 2060 - Manual (Page 273)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
P
R
OBLEM
S
O
LV
IN
G
6–7
Problem Suggested Solution
Excessive paper curl
(continued). Paper curl may be a result of:
• Allow output to sit for awhile so any excess oil
can evaporate before using them as original
documents.
• Copying high density background areas or
documents with alternating high and low
density areas results in more curl. Attempt to
reduce the amount of curl by adjusting the
image quality controls to reduce the amount of
dry ink on the copies.
• Place the digital press with scanner and paper
in a room with air conditioning and low
humidity to minimize the moisture in the
environment.
• Attempt to copy on thicker paper or on paper
stock that is less sensitive to moisture.
Moiré patterns on the
copies • This problem sometimes occurs when original
documents have halftone images. Perform the
following suggested solutions in the following
order:
• Select Halftone as the Original Type. If
selecting Halftone does not solve the problem,
select Map as the Original Type.
• Rotate the original on the Document Glass by
180 degrees.
• Reduce or enlarge the output by 5%.
• Use the Sharpness feature to select Softer
options until the moiré patterns are not
visible.