Xerox DocuColor 2060 - Manual (Page 53)

O V E R V I E W
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
OVER
VIEW
2–3
Part Description
Upper Door
Transport
Module The Upper Door Transport Module paper path transports
paper from the Paper Trays to the Transport Module.
Transport
Module The Transport Module carries the paper from the paper
trays to the upper paper path of the digital press. It also
routes the paper from the lower paper path of the digital
press to the upper paper path of the digital press when
duplexing.
Duplex
Automatic
Document
Feeder (DADF) The DADF automatically feeds originals to be scanned
as Simplex or Duplex. The DADF is an option
with a
capacity of up to 50 same size or mixed size, 16 to
32 pound (64 to 128 g/m
2
) documents. The DADF is
not on the printer-only configuration.
Scanner Scans the original to be copied.
Document Glass An original can be placed on the Document Glass to scan
for copying.
ON/OFF
ON
OFF
Press the Power Switch to the On position to switch
the digital press on.
A screen message advises of a short wait while the
Fuser warms up and the digital press runs a system
check. You can program the digital press for a job during
this time and the printing process will start
automatically when the digital press is ready.
Press the Power Switch to the Off position to switch
the digital press off.
Allow the digital press to remain off for a minimum of 20
seconds before switching the power on again.
Touch Screen Allows selections to be made by simply touching the
selections on the screen.