ZyXEL Communications SMG-700 - Manual (Page 122)

Appendix B Windows Wireless Management
NWD-270N User’s Guide
122
Protected EAP Properties
Figure 96 Windows XP: Protected EAP Properties
The following table describes the labels in this screen.
Table 38 Windows XP: Protected EAP Properties
LABEL DESCRIPTION
Validate server
certificate Select the check box to verify the certificate of the authentication server.
Connect to these
servers Select the check box and specify a domain in the field below to have your
computer connect to a server which resides only within this domain.
Trusted Root
Certification
Authorities: Select a trusted certification authority from the list below.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Do not prompt
user to authorize
new server or
trusted
certification
authorities. Select this check box to verify a new authentication server or trusted CA without
prompting.
This field is available only if you installed the Windows XP server pack 2.
Select
Authentication
Method: Select an authentication method from the drop-down list box and click Configure
to do settings.
Enable Fast
Reconnect Select the check box to automatically reconnect to the network (without re-
authentication) if the wireless connection goes down.
OK Click OK to save your changes.
Cancel Click Cancel to leave this screen without saving any changes you may have
made.