ZyXEL Communications SMG-700 - Manual (Page 29)

Chapter 2 Tutorial
NWD-270N User’s Guide
29
"
Only one profile can be activated and used at any given time.
Figure 18 ZyXEL Utility: Profile Activate
8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while
it connects to the AP using your settings. When the wireless link is established, the
ZyXEL utility icon in the system tray turns green and the Link Info screen displays
details of the active connection.
9 Make sure the selected AP in the active profile is on and connected to the Internet. Open
your Internet browser, enter http://www.zyxel.com or the URL of any other web site in
the address bar and press ENTER. If you are able to access the web site, your new profile
is successfully configured.
10 If you cannot access the Internet, go back to the Profile screen. Select the profile you are
using and click Edit. Check the details you entered previously. Also, refer to the
Troubleshooting section of this User's Guide or contact your network administrator if
necessary.
2.4 Configuring the NWD-270N as an AP
In access point mode, your NWD-270N allows you to set up your wireless network without
using a dedicated AP. See
Chapter 5 on page 65 for more information.
After you install the ZyXEL Utility and then connect the NWD-270N to your computer,
follow the steps below to set up your NWD-270N as an AP.