Yamaha RX-N600 - Manual (Page 81)

77
En
SET MENU
AD
V
A
N
C
ED
OPERA
T
ION
5
Press u / d repeatedly and then press
ENTER to select and enter the desired
submenu.
The following display is an example where
“SPEAKER LEVEL” is selected.
6
Press u / d to select the desired parameter
and then j / i to change the parameter
settings.
• Press i to increase the value.
• Press j to decrease the value.
7
Press SET MENU to exit from “SET MENU”.
Use this menu to manually adjust any speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors.
■ Speaker settings A)SPEAKER SET
Use this feature to manually adjust any speaker settings.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Front speakers FRONT SP
Choices: SMALL, LARGE
• Select “SMALL” (small) if you have small front
speakers that do not reproduce low-frequency signals
effectively. The low-frequency signals of the front left
and right channels are directed to the speakers selected
in “LFE/BASS OUT” (see page 78).
• Select “LARGE” (large) if you have large front
speakers that reproduce low-frequency signals
effectively. All the front left and right channel signals
are directed to the front left and right speakers.
If “LFE/BASS OUT” is set to “FRNT” (see page 78), the LFE
signals found in Dolby Digital or DTS sources, the low-frequency
signals of the front left and right channels, and the low-frequency
signals of other speakers set to “SML” (or “SMALL”) are all
directed to the front left and right speakers regardless of the
“FRONT SP” setting.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, the stored data will be lost in case the power
cable is disconnected from the AC wall outlet or if the
power supply is cut off for more than one week.
. FL ;;;;;;;;;;
FR ;;;;;;;;;;
C ;;;;;;;;;;
B)SPEAKER LEVEL
-__________+
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
MENU
SET MENU
SRCH MODE
1 SOUND MENU
Note
. A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)CENTER GEQ
[ ]/[ ]:Up/Down
[ENTER]:Enter
1 SOUND MENU 1/2
p
p
. E)LFE LEVEL
F)DYNAMIC RANGE
G)AUDIO SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
1 SOUND MENU 2/2
p
p
SMALL >LARGE
FRONT SP