Yamaha CD Recordable/Rewritable Drive CRW2200 - Manual (Page 23)

Setup Procedures
15
Connecting examples
Yamaha recommends one of the following connections.
Example-1: As secondary slave (For supplemental drive)
Example-2: As secondary master
(For replacing your existing drive with the unit)
To make the best use of the performance of the CRW2200E drive,
Yamaha recommends you connect it as a sole secondary master.
Note
The CRW2200E drive is shipped with the SLAVE setting. Reset to MASTER if
you connect the drive solely to the secondary IDE cable.
CRW2200E
(slave)
CD-ROM drive
etc. (master)
Hard disk
(master)
Hard disk
(slave)
IDE cable
(primary)
IDE cable
(secondary)
CRW2200E
(master)
Hard disk
(master)
IDE cable
(primary)
IDE cable
(secondary)