ZyXEL Communications PRESTIGE 153 - Manual (Page 91)

Prestige 153/153X WAN Bridge/Routers
Remote Node TCP/IP Configuration 5-1
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node.
5.1 LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the
headquarters, as depicted in the following Figure 5-1.
Figure 5-1. LAN-to-LAN Application with TCP/IP
For the branch office, you need to configure a remote node to dial out to the headquarters.
Additionally, you may also need to define static routes if some services reside beyond the
immediate remote LAN.
Prestige 153/153X
Prestige 153/153X
Coporate LAN
Branch Office LAN