ZyXEL Communications 2864I - Manual (Page 88)

TCP/IP Configuration 75
Figure 7-5 Menu 12 - Static Route Setup - Main Menu
Figure 7-6 IP Static Route Setup
1. Route Name - Enter a descriptive name for this route. This is
for identification purpose only.
2. Active - This fields allows you to activate/deactivate this static
route.
3. Destination IP Address - This parameter specifies the IP
network address of the final destination. Routing is always
based on network number. If you need to specify a route to a
single host, use a subnet mask of 255.255.255.255 in the subnet
mask field to force the network number to be identical to the
host ID.