Configuring the ppd file – Xerox 50 LP/ST User Manual
Page 110
8-8
Printer Driver Installation
Configuring the PPD File
The Xerox Document Centre ColorSeries 50 PPD (PostScript Printer
Description) file can be used for printing with the printer driver and the Apple
LaserWriter 8.x printer driver.
To configure the Macintosh PPD:
1
In the Apple Chooser, select the Document Centre ColorSeries 50 or
Apple LaserWriter 8.x printer.
2
Select the appropriate AppleTalk zone (if applicable) and one of the above
printers.
3
Click Create (initial installation) or Setup (all subsequent installations)
and select the PPD file for the Xerox Document Centre ColorSeries 50.
The PPD screen appears.
4
On the PPD screen, click Select PPD.
5
If it is not already selected, highlight the Xerox Document Centre
ColorSeries 50 PS v.3011 PPD in the list and click Select.
6
Click OK.
7
Optionally, on the PPD screen, click Configuration to modify the
memory configuration and default output tray for the printer. Click
Printer Info to view a listing of the current printer setup, such as printer
name and PostScript level.
To print a test page:
1
Open an application, such as QuarkXpress, and print a test page using the
Macintosh printer driver.
2
The Xerox Document Centre ColorSeries 50 Macintosh driver installation
and configuration is now complete.
Note:
For information on submitting print jobs, customizing print options, and
uninstalling the printer driver, see the
Xerox Document Centre ColorSeries 50
LP/ST Digital Color Copier/Printer Printer User Guide.