Yamaha CDX-393 - Manual (Page 11)

11
English
CDX-493, CDX-393
Changing the brightness of the display
CDX-593
You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.
During play
DIMMER
Normal illumination
Dim
(Off)
* While the display illumination is off,
the AUTO DISPLAY OFF indicator
on the front panel is illuminated.
AUTO
DISPLAY OFF
During stopped or paused
Normal illumination
Dim
Dim
(The AUTO DISPLAY OFF indicator lights up.
In this state, if a disc is played, the display illumination
will be turned off.)
If desired, you can change the brightness of the display in three
degrees by pressing the DIMMER button.
DIMMER
Normal illumination
Slightly dim
Dim
When you listen with headphones
PHONES
OUTPUT LEVEL – +
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL button. Note that this
adjustment will also vary the signal output level to the amplifier.
CDX-593 and CDX-493 only