Yamaha KX W482 - Manual (Page 8)

8
s
DECK B DECK A
MUTE/SEARCH
SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection
When the @ tape running indicator is lit:
To search for the next selection
When the
# tape running indicator is lit:
⁄ !
MUTE/SEARCH MUTE/SEARCH
Press
simultaneously. Press
simultaneously.
+ +
When the @ tape running indicator is lit:
To search for the beginning of the current selection
When the
# tape running indicator is lit:
! ⁄
To search for the selection located before the current selection
÷ Operate the following buttons when the beginning of the current selection is being played.
MUTE/SEARCH MUTE/SEARCH
Press
simultaneously.
Press
simultaneously.
+ +
When the # tape running indicator is lit: When the @ tape running indicator is lit:
! ⁄
MUTE/SEARCH MUTE/SEARCH
Press
simultaneously. Press
simultaneously.
+ +
Notes
÷ The blank interval between selections must be at least 4 seconds long.
÷ Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise.
÷ Use the tape counter to aid in locating a point on a tape (0000 to 9999). To set the counter reading to “0000”, press the
RESET button.
RESET ⁄ !