SUUNTO Yachtsman - Manual (Page 7)

5
CHAPTER 1 INTRODUCTION
1.1 MAIN FUNCTIONS (MODES)
The Mariner/Yachtsman features the following functions: sailing timer, barometer, compass and watch. These are
identified as sail mode [SAIL], barometer mode [BARO], compass mode [COMP] and time mode [TIME] in this manual
and also on the display of the instrument.
The Regatta features identical [SAIL], [COMP] and [TIME] modes but does not include [BARO] mode.
1.1.1 Backlight Features
The Wristop Computer has an electroluminescent backlight. This is initiated by pressing and holding the [Mode]
button in for 2 seconds. The backlight will remain on for 5 seconds. Pressing the [Mode] button during this time will
restart the 5 second period, continuing the backlight feature.
1.1.2 Water Resistance
The Wristop Computer is waterproof to a depth of 30m/100ft (according to ISO 2281).
Note: The Wristop Computer models are not dive instruments. Buttons should not be operated (put to use) while under
water.
1.2 BUTTON FUNCTIONS
Four buttons are used to operate the Wristop Computer: [Mode], [+] (ON/OFF), [-] (Fast Bearing), and [Select].
1.2.1 The [Mode] Button
Is located on the top right of the Wristop Computer.
• In the main mode level, pressing the [Mode] button allows the user to select or move from one mode or function to the
next (TIME, SAIL, BARO, COMP).
• In the sub mode level, pressing the [Mode] button returns the user to the main mode level.
• In the setup process, pressing the [Mode] button accepts the changes or preferences. Pressing the button again will
return the user to the main mode level.
• Pressing the button for 2 seconds activates the backlight feature.