Yamaha DVD CHANGER - Manual (Page 21)

17
English General Features
Note:
– Unless stated, all operations described are based
on remote control use. Some operations can be
carried out using the menu bar on the TV screen.
Moving to another title/chapter
When a disc has more than one title/track or
chapter, you can move to another title/chapter as
follows:
1 Press ON SCREEN, then select W or X in the
menu bar.
2 Press 3/4 or the numerical keys to select a title/
chapter.
1 Press T or S briefly during playback to go
to the next track or to return to the beginning of
the currect track respectively.
2 Press Stwice briefly to step back to the
previous track.
3 To go directly to any track, enter the track
number using the numerical keys.
Search
1 Select in the menu bar and press 4.
2 Use 1/2 to select the required speed: –32, –8 or
–4 (backward), or +4, +8, +32 (forward).
3 Select 1 to play the disc at normal speed again.
4 To exit the Search mode, press 3.
● To search forward or backward through different
speeds, you can also hold down T or S for
more than two seconds.
Slow Motion
1 Select in the menu bar and press 4.
➜ Playback will pause.
2 Use 1/2 to select the required speed: –1, –1/2,
–1/4 or –1/8 (backward), or +1/8, +1/4, +1/2 or
+1 (forward).
3 Select 1 to play the disc at normal speed again.
4 If ; is pressed, the speed will be set to zero
(PAUSE).
5 To exit slow motion mode, press 3.
(Playback continues at the selected speed.)
Still Picture and Frame-by-frame
playback
1 Select in the menu bar and press 4.
➜ Playback will pause.
2 Use 1/2 to select the previous or next picture
frame.
● Press PLAY to play the disc at normal speed again.
Note:
– You can also activate frame-by-frame playback by
pressing PAUSE repeatedly on the remote control.
Scan
Scanning plays the first 10 seconds of each
chapter/track on a disc.
1 Press SCAN.
2 To continue playback at your chosen chapter/
track, press SCAN again or press PLAY.
DVD VCD
CD
DVD VCD
CD
DVD VCD
DVD VCD
DVD VCD CD
Operation