Yamaha DVD CHANGER - Manual (Page 23)

19
English
4 Use 1, 2, 3, 4 to pan across the screen.
5 When ENTER/OK is pressed only the panned
picture will be shown on the screen.
6 To exit ZOOM mode, select zoom factor to
“Off” (zoom factor 1) in the menu bar.
Note:
– ZOOM mode gets deactivated when starting
playback of next element in FTS across disc and
Shuffle across Disc modes.
Favorite Track Selection Across Disc
● This FTS function allows you to create a list
favorite tracks by selecting tracks from different
discs available in the disc tray.
● The supported discs are CDDA, MP3, VCD,
SVCD.
● Favorite Track Selection (FTS) list contains up to
100 elements across all the discs on the tray.
Storing a Program
1 Press OPEN/CLOSE and load preferred discs
onto the disc tray.
2 In STOP mode, select FTS in the menu bar.
3 Press 4 in the menu bar.
➜ The FTS window menu appears.
4 Select All Discs option.
Storing entire disc as the FTS
1 Press 4 to select DISC.
2 Use 2 and 1 to select the require disc list for all
the loaded discs in the disc tray.
3 Press ENTER/OK to store the entire disc
selection.
Storing album/title
1 Press 4 to select ALBUM/TRACK. Albums are for
MP3 discs and Tracks for (S)VCD.
2 Use 2 and 1 to select the require Album/Track.
3 Press ENTER/OK to store the entire selected
Album/Track.
➜ The Album/Track. number will be added to
the program list.
Storing track/chapter
1 Press 4 on the selected TRACK/INDEX. Tracks
are for MP3/CDDA discs and Index for S(VCD).
➜ The track/chapter number will be highlighted.
2 Use 2 and 1 to select the required Track/Index.
3 Press ENTER/OK to confirm the selection.
➜ The selected Track/Index will be added to the
program list.
4 Press ON SCREEN to exit the FTS menu.
Switching a Program OFF
1 Use 3/4 to move to FTS.
2 Press 2 or 1 to select OFF.
3 Press ON SCREEN to exit.
Erasing a selection in a Program
1 While playback is stopped, select FTS in the menu
bar.
2 Use 4 to select PROGRAM.
3 Use 2 and 1 to select the required number.
4 Press ENTER/OK to erase the selection.
5 Press ON SCREEN to exit.
Erasing all selections
1 While playback is stopped, select FTS in the menu
bar.
2 Use 4 to select CLEAR ALL and press ENTER/
OK.
➜ All selections will be erased.
3 Press ON SCREEN to exit.
Note:
– Pressing PLAYXCHANGE or OPEN/CLOSE during
playback will erase the selected Program if any.
– With VCD 2.0, set the PBC (Playback Control) to
Off.
FTS for a Single disc
1 Select FTS in the menu bar.
2 Press 4 in the menu bar.
➜ The FTS window menu appears.
3 Select CURRENT DISC option.
press OK to pan
no 2 off 1 1
Operation