Electric oven, Before the first use of the oven, Oven function control knob – Zanussi ZCE 641 User Manual

Page 7: Thermostat control knob, Mains on light, Thermostat control light

Advertising
background image

7

Oven Function Control Knob

Oven Light - The oven light will be on without any
cooking function

Defrost Setting - This setting is intended to assist in
thawing of frozen food .

Fan cooking - This allows you to roast or roast and
bake simultaneously using any shelf, without flavour
transference.

Grill - The heat comes only from the top element.

Electric Oven

Thermostat Control Knob

Turn the thermostat control knob clockwise to select
temperatures between 50°C and about 230°C (max).

Mains On Light

The mains on light will come on when any function (oven
or hob) is selected.

Thermostat Control Light

The thermostat control light will come on when the
thermostat control knob is turned. The light will remain on
until the correct temperature is reached. It will then cycle
on and off to show the temperature is being maintained.

Before the First Use of the Oven

Remove all packaging, both inside and outside
the oven, before using the oven.

Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.

1. Switch the oven function control knob to fan

cooking

.

2. Set the thermostat control knob to MAX.

3. Open a window for ventilation.

4. Allow the oven to run empty for approximately 45

minutes.

This procedure should be repeated with the grill
function for approximately 5-10 minutes.

Advertising
This manual is related to the following products: