ZTE F152 - Manual (Page 64)

64
Connecting to a Bluetooth Car Kit or Personal Headset
Please follow the manufacturers instructions carefully regarding getting your Bluetooth
device into Pairing Mode.
You cannot connect your phone to the far end device unless Pairing Mode is enabled.
Usually the device will flash rapidly to indicate pairing mode. After finding the device you
need to share a password and press Connect.
• Make sure Bluetooth is on and in Show mode and the other device in is Pairing Mode.
• From your handset go to the Bluetooth menu and press the OK Key to open My Devices.
• Press the Right Select Key to Search.
• From the list of available devices move the cursor to the required device and press OK to
Connect.
• Enter the pass code specified in the user guide of your far end device (Usually 0000 or
1234).
• The far end device will acknowledge the connection and your handset will report the
Device has been added.
• In My Devices go to your new device and press the OK Key to Connect.
• The devices are now paired.
• When you get an incoming call this will be sent to your Bluetooth device automatically,
press the call button to answer.
• Use the Call button on your Bluetooth device to activate Last Number redial. The phone
will automatically dial out the last number.