Zanussi ZCG560G - Manual (Page 9)

Oven function Application
Pizza setting To make pizza.
Gas oven cooking
Ignition of the oven gas burner:
1. Open the oven door.
2. Hold a flame near the hole in the bottom of
the oven cavity.
3. At the same time push the knob for the
oven functions down and turn it counter-
clockwise to the maximum setting.
4. When the flame comes on, keep the gas
oven control knob pushed for approximate-
ly 15 seconds.
After ignition:
1. Release the knob.
2. Close the oven door.
3. Turn the knob for the oven functions to the
necessary setting.
Oven safety device:
The oven has a thermocouple. It stops the gas
flow, if the flame goes out.
If the oven gas burner does not come on
or if it accidentally goes out:
1. Release the knob for the oven functions
and turn it to the off position.
2. Open the oven door.
3. After one minute, try to light the burner
again.
Turning off the oven burner
To put out the flame, turn the knob to the off
position.
Oven - Using the accessories
Warning! Refer to the Safety chapters.
Inserting the baking tray
Put the tray in the centre of the oven cavity, be-
tween the front and rear wall. This ensures that
the heat can circulate in front of and behind the
baking tray. Make sure that the tray is posi-
tioned like in the picture, with the angled slope
in the rear.
9
www.zanussi.com