The programmer – Zanussi ZCE 7600 User Manual

Page 12

Advertising
background image

KEY

A

AUTO DISPLAY

B

MINUTE MINDER BUTTON

C

COOKING HOURS BUTTON

D

STOP TIME BUTTON

E

COOKING SYMBOL

F

MANUAL SELECTOR BUTTON

G

DECREASE CONTROL

H

INCREASE CONTROL

NOTE:

STEP 1 BELOW MUST BE
FOLLOWED BEFORE THE OVEN
WILL OPERATE MANUALLY.

1. SET THE TIME OF DAY

When the electricity supply is first switched ON,
the display will flash both 0.00 and AUTO. See
Fig. 1.

Press the two buttons marked ( ) and ( )
press the increase control button (+) and if
necessary, the decrease control button (-) until
the correct time on the 24 hour clock is reached,
e.g. 10.00am as Fig. 2.

Note: The increase and decrease control
buttons operate slowly at first, and then more
rapidly. They should be pressed separately.

The AUTO symbol will go out when the correct
time of day is set. See Fig 2.

2. THE MINUTE MINDER

The minute minder gives an audible reminder at
the end of any period of cooking up to 23 hrs 59
mins. It is not part of the automatic control.

To set, press the minute minder button ( ) and
the digital display will read 0.00 and the bell
symbol will glow, as Fig. 3.

Press the increase control (+) until the display
indicates the interval to be timed, e.g. 1 hr 45
mins as Fig. 4.

NOTE: This must be completed within 4
seconds of first pressing the minute minder
button.

12

THE PROGRAMMER

4.

1.

2.

3.

Advertising
This manual is related to the following products: