ZyXEL Communications SP-200E - Manual (Page 5)

SP-200E User’s Start Guide
5
4 Web Configurator
The web configurator allows you to change the SP-200E’s IP address or encryption key. You should also
change the SP-200E’s password.
4.1 Web Configurator Login
Follow the steps below to access and use the web configurator.
Note: The SP-200E allows only one web configurator session at a time.
1 Give your computer a static IP address between 192.168.1.1 and 192.168.1.254 (but do not use
192.168.1.7) and connect your computer directly to the Ethernet port.
2 Launch your web browser and type 192.168.1.7 as the web address..
3 A login screen displays. Type “admin” (default) as the user name and "1234" (default) as the password.
The user name and password are case sensitive.
3 Set a paper roll in the printer so that it unrolls
from the bottom.
4 Pull some paper out to start the roll.
Press down on the middle of the cover to close it (do
not press on only one side of the cover). Press firmly
until you feel the cover lock into the closed position.
5 Hold button A down to print a self-test. Pull the paper
down across the tear bar from one side to the other
to cut it.