Yamaha GX-3 - Manual (Page 23)

E-17
English
TUNING OPERATION
To recall a preset station
1 1
Select the reception band (FM or AM) of the station you
want to recall by pressing the FM/AM button while
watching the display.
2 2
Select the preset station number to which the station is
stored by pressing the preset station number buttons on
the remote control transmitter or the PRESET
/
buttons on the front panel.
Notes
• A new setting can be stored in place of the former one of
the same reception band.
• If the AC supply lead is disconnected from the AC outlet
or the power is cut due to temporary power failure, the
memory may be erased. If so, it can be re-programmed by
simply following the Preset tuning steps.
TAPE DECK OPERATION
General information
• Do not use C-120 tapes or poor-quality tapes, since they
can cause malfunctions.
• Before loading a tape into the cassette compartment,
tighten the tape slack with a pen or pencil.
• Tapes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the tab
on the top left protects the side facing you from erasure.
Cover the tab holes with adhesive tape to erase or record
again.
•
This deck is a Double Cassette Deck with Automatic
Reverse Function.
DECK A: Playback only.
DECK B: Playback or recording.
•
This deck features an auto tape selector. Just load the
tape, and the tape formula being used will be sensed
automatically.
• This unit can play back metal tapes as well as normal or
chrome tapes, and recording can also be done on metal
tapes.
• When covering erasure prevention tab holes, do not cover
the chrome and metal detection holes. Otherwise, the
deck will treat tape as normal tape.
• Do not press the EJECT button during playback or
recording.
Detection hole
Tab