Yamaha RX-V470 - Manual (Page 22)

22
If you use the SLEEP timer of this unit, you can set this unit to be turned off automatically. When you are going to sleep while
enjoying a broadcast or other desired input source, this timer function is helpful.
Notes
÷ The SLEEP timer can be controlled only with the remote control transmitter.
÷ The components on which the SLEEP timer is effective are the sources connected to a SWITCHED OUTLET on the rear
panel of this unit.
To set the SLEEP timer
Display the desired time with the SLEEP button.
SLEEP
SLEEP time off
(No display appears when the
EFFECT button is turned off.
The delay time appears when the
EFFECT button is turned on.)
r®Y = ÊY = RY = tY
2
5
(minutes)
Each time the SLEEP button is pressed, the
time setting changes in the following order.
To cancel the SLEEP timer
Press the SLEEP button so that the SLEEP indicator goes
out.
SLEEP
S L E E P
Goes out.
SETTING THE SLEEP TIMER
S L E E P
Indicates the SLEEP time.
«
Returns to the display
before the SLEEP timer is
set after a while.
Flashes for about 3 seconds.
«
Lights up.
The unit will be turned off automatically after the passing of
the SLEEP time you selected.