Zanussi jetstream ZJD12191 - Manual (Page 7)

7
This option cannot be used with the Economy
programmes 60°E and E°40 and Miniprogram
and
also not in combination with QUICK WASH option .
7 QUICK WASH button
This option can be used for lightly soiled cotton,
synthetic or delicate items hat have been used or worn
for a short time.
This option is not available with the
WOOL
/
(handwash) programme, the Energy saving
programmes (60°E and 40°E) and Miniprogramme .
It cannot be used also in combination with DAILY
option.
8 SUPER RINSE button
This option can be selected with all programmes, except
the
WOOL
/
HANDWASH
and Miniprogramme .
The machine will add 2 rinses for cotton and 1 rinse for
synthetics and delicates.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
9 DRYING TIME button
By depressing this button you can select the desired
drying time according to the fabrics (cotton or
synthetics) you have to dry.
To select the drying time you have to push the button
until the drying time you want appears in the display.
For COTTON and SYNTHETICS you can select a time
from 10 to 130 minutes.
For automatic Washing & Drying programmes the
drying time is displayed for 2 seconds, then the duration
of the programme will appear.
10 DELAY START button
The wash programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
●
Select the programme and the required options.
●
Select the delay start.
●
Depress START PAUSE button: the machine starts
its hourly countdown.
The programme will start after the selected delay has
expired. The DELAY START cannot be used with
(D
RAIN
) or (SPIN) programmes.
Cancelling the delayed start
●
Depress START PAUSE button.
●
Depress DELAY START button until « 00’’ » is
displayed.
●
Depress START PAUSE button again, if you wish to
restart the machine immediately.
11 START/PAUSE button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
Pause
To interrupt a programme which is running, depress the
START PAUSE button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the START PAUSE button again.
12 DISPLAY
The display shows the following information:
Reset/Cancelling - Duration of the programme -
Drying time - Delayed start - Incorrect option
selection - Alarm code - End of programme
Reset/cancellation of the programme
If the programme selector dial is turned to X position,
three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not turned to X
position , when you press the ON/OFF button to switch
the machine on, the display will show a blinking zero.)
---