Function menu – Yamaha pdm-4210 User Manual

Page 40

Advertising
background image

38

OPERATING INSTRUCTIONS (continued)

PICTURE MENU (continued)

Selected characters

Setup hint

Color Management

Off On

Turn On when the original balance of each color is required to adjust
to suit user preferences.

Magenta

Magenta is weakened.

Magenta is strengthened.

This adjusts listed colors individually to make them either deeper or
more pure. These settings are independently stored in each of the 4
Color Temperature modes.

Red

Red is weakened.

Red is strengthened.

Yellow

Yellow is weakened.

Yellow is strengthened.

Green

Green is weakened.

Green is strengthened.

Cyan

Cyan is weakened.

Cyan is strengthened.

Blue

Blue is weakened.

Blue is strengthened.

Color Decoding

RGB R G B

Select the single color screen you need to adjust R/G/B level
individually depending on the user’s preference. Set it back to RGB
mode that indicates each color (R/G/B) mode after adjusting.
Press the OK button every time the setting is changed.

Red

Darkens red only.

Lightens red only.

This adjusts R/G/B levels or tints to make the color appear natural.
These settings are independently stored in each of the 4 Color
Temperature modes.

Green

Darkens green only.

Lightens green only.

Color

Darkens colors.

Lightens colors.

Tint

Enhances red and weakens
green.

Enhances green and weakens
red.

FUNCTION MENU

1 item is added to the Menu shown in the page .

Picture
Audio
Timer
Function
Setup
Language
Select
OK Set

Function
Screen Saver

Off

Screen Wipe

On 60Min.

Black Side Panel

Off

Video Power Save

Off

Freeze Mode

Split

Default Zoom

Panoramic

Reset

Reset

Select Set Return

OK

MENU

Function
Panel Life

Normal

Mode Display

Off

ID Number

1

Inverse

On 60Min.

Standby White

Off

Gamma

2.2

Reset

Reset

Select Set Return

Selected characters

Setup hint

Video Power Save

Off On

This is used to reduce power consumption for video input when there
is no video signal. Setting it to On will place the monitor to the
standby mode when the AV input with no signal is selected.

Advertising