Zenoah BT225 - Manual (Page 19)

9. Maintenance
• Always be sure to stop the engine before inspecting the brushcutter for problems or
performing maintenance.
• Never alter the brushcutter or take the engine apart.
• When replacing parts, always be sure to use only RedMax products or products which
have been certified by RedMax for use with the RedMax brushcutter.
• Things to check before using brushcutter.
■ REFILLING TRIMMING LINE
WARNING
1 4 6
2 5 7
3
7.6m
(25')
3.8m
(12.5')
Ø2.4mm
0.095In
Maintenance, replacement, or repair of the emission control device and systems may be
performed by any non-road engine repair establishment or individual.
19 