Xerox 510DP (Operator Manual) - Manual (Page 32)

OFF-LINE SETUP MENU
22 XEROX WIDE FORMAT 510dp OPERATOR MANUAL
Accessing the Printer Menu
Note: If there is a Scanner connected, the message displayed will
be SYNERGIX CS 510dp. If there is no Scanner connected the
message will be SYNERGIX PS 510dp.
To access the Printer Menu:
1. Press the On-line/Off-line key to enter off-line mode.
• The on-line/off-line indicator will go out.
• The display will indicate " SYNERGIX CS 510dp PAUSED"
or "SYNERGIX PS 510dp."
2. Press the Enter key to access the SYNERGIX CS 510dp or
"SYNERGIX PS 510dp" SETUP MENU.
3. Press the Previous or Next key until <PRINTER MENU> is
displayed.
4. Press the Enter key to access the PRINTER MENU.
• The display will indicate "PRINTER MENU <AUDIBLE
INDICATORS>." This is the first PRINTER MENU option.
Enabling or disabling the audible indicators
Note: If there is a Scanner connected, the message displayed will
be SYNERGIX CS 510dp. If there is no Scanner connected the
message will be SYNERGIX PS 510dp.
To enable or disable the Audible Indicators:
1. Access the PRINTER MENU. See "Accessing the Printer
Menu" in this chapter.
2. Press the Enter key to select AUDIBLE INDICATORS. The
current setting for the KEYPRESS option is displayed.
3. Do one of the following:
• To select the KEYPRESS option, press the Enter key.
• To select the ALARM option:
- Navigate to it by pressing the Previous or Next key.
The current setting for the ALARM option is displayed.
- Press the Enter key to select the option.
4. Press the Previous or Next key to switch between ON and
OFF.
5. Press the Enter key to save your selection.
6. Press the On-line/Off-line key to return to on-line mode.
• The on-line/off-line indicator will light.
• The display will indicate " SYNERGIX CS 510dp" IDLE or
"SYNERGIX PS 510dp."