Zoom G1N - Manual (Page 3)

4 ZOOM G1N/G1XN 5 ZOOM G1N/G1XN
Controls and Functions / Connections (G1N)
[VALUE] knob
[BANK UP·TAP] key
RHYTHM [
R
/
P
] key
Module selector
[
W
]/[
Q
] foot switches
[INPUT] jack
[CONTROL IN] jack
AC adapter
Guitar
Guitar amplifier
Headphones
FP01/FP02
FS01
Serves for connecting the guitar.
When operating the G1N on
batteries, inserting the guitar
cable plug into this jack will
turn the unit on.
Serves for connection of the optional foot switch (FS01)
or expression pedal (FP01/FP02).
[DC IN] jack
An AC adapter (ZOOM AD-0006) with a rated
output of 9 volts DC, 300 mA (center minus plug)
can be plugged into this jack.
In play mode, the key switches to the next higher bank. In other
modes, the key serves for manual adjustment of rhythm pattern
tempo as well as parameters related to timing and cycle.
[STORE] key
Display
Serves for storing edited patches in memory and for copying
patches to another location.
Shows bank and patch numbers, setting values,
and other information for operating the G1N.
This knob serves for changing parameter values and setting the
level of the overall patch.
These switches are used for selecting patches, controlling the tuner,
and other functions.
Serves to start and stop the rhythm pattern in
play mode and rhythm mode.
Switches between play mode, rhythm mode,
and edit mode. In edit mode, the knob selects
the module/parameter for operation.
Top Panel
Rear Panel
When operating the G1N on batteries, it is
advisable to disconnect the guitar cable
plug from the [INPUT] jack when not using
the unit, to conserve battery power.
[OUTPUT/PHONES] jack
This stereo phone jack serves for connection to
the guitar amplifier. It is also possible to use a Y
cable for sending the output to two amplifiers, or
to plug a pair of stereo headphones into this jack.
Controls and Functions / Connections (G1N)