Yamaha RX-V795 - Manual (Page 23)

19
English
This unit is equipped with additional 6-channel audio signal
input terminals (for left main, right main, center, left rear
surround, right rear surround and subwoofer channels) for
inputting signals from an external decoder of a future format to
this unit.
To listen to a sound by reproducing signals input to these
terminals, press the TAPE/MD MON/EXT. DECODER button
on the front panel repeatedly until “EXT. DECODER” appears
on the display. By doing so, the signals input to these terminals
are sent to the corresponding SPEAKERS terminals and
OUTPUT terminals of this unit. Notes
● When signals input to these terminals are selected, the
digital sound field processor cannot be used.
● The settings of “1. CENTER SPEAKER,” “2. REAR
SPEAKER”, “3. MAIN SPEAKER” and “4. LFE/BASS OUT”
in the SET MENU mode have no effect on the signals input
to these terminals. The setting of “5. MAIN LEVEL” is
effective. (Refer to pages 27 to 28 for details.)
● The adjustments of the output level of the center speakers,
rear speakers and subwoofer are effective when the signals
input to these terminals are selected as the input source.
(Refer to pages 46 to 47 for details.)
Ⅵ
Connecting an external decoder of a future format to this unit
GND
ON SCREEN SELECTOR
S VIDEO VIDEO REMOTE
CONTROL
IN OUT
FM
ANT
AM
ANT
75 Ω UNBAL.
GND
PHONO CD TAPE/MD DVD/LD TV/DBS VCR
IN OUT
1 3 4
AUDIO SIGNAL
IN (PLAY) OUT (REC)
SUB
WOOFER
EXTERNAL DECODER INPUT
MAIN CENTER SURROUND
OUT
VCR
MONITOR
OUT DVD/LD TV/DBS
IN MONITOR
OUT
IN OUT
VCR
VIDEO SIGNAL S VIDEO SIGNAL
DVD/LD
COAXIAL OPTICAL OPTICAL
DVD/LD TV/DBS CD
DIGITAL SIGNAL
SUBWOOFER OUT SURROUND OUT CENTER OUT MAIN OUT
External decoder
(U.S.A. model)
PREPARATION