Yamaha RX-V795 - Manual (Page 36)

32
11
When the adjustment is finished, press the TEST
key once again to cancel the test tone.
Notes
● Once you have completed these adjustments, you can
adjust the sound level on your audio system by using the
VOLUME control (or the VOLUME keys on the remote
controller) only.
● If you use external power amplifiers, you may also use
their volume controls to obtain proper balance.
● If the function “1. CENTER SPEAKER” in the SET MENU
mode is set in the “NONE” position, in step 10, the sound
output level of the center speaker cannot be adjusted.
This is because in this mode, the center sound is
automatically output from the left and right main speakers.
● If there is insufficient sound output from the center and
rear speakers, you may decrease the main speaker
output level by setting the function “5. MAIN LEVEL” in
the SET MENU mode in the “–10dB” position.
Remote control
Disappears
+
100
CLEAR
TEST
A/B/C/D/E
+ 100
+ 10
POWER
TV
PHONO
V-AUX
EXT. DEC.
CH CH
VOLUME
MUTE
ROCK CHURCH
JAZZ CLUB
CLEAR
SLEEP
ENTER
HALL TEST
EFCT
DISP
DSP
TV
DISC SKIP
PRESET ON/OFF
CODE SET
INDEX
A/B
VCR REC TV INPUT
ON SCREEN
8
7
0
9
/
11
PREPARATION