3M MP8620 - Manual (Page 10)


3M 1997 3M

Multimedia Projector MP8620 9
4-5. Menu Adjustments/Settings
Depending on the current video source selection, the menu items for either the Video Menu or the Data
Menu will display. The table below lists all the menu items that can be adjusted.
An asterisk (*) indicates the item appears on the Data menu only, two asterisks (**) indicate the item
appears on the Video/S-VHS menu only and no marking ( ) indicates the item is common to both menus.
Submenu Menu Item Explanation of Adjustment/Setting
Setup*/Picture** <Mode>* Selection of graphic mode (e.g. VGA 640 x 480, VESA 800 x 600
72 Hz, etc.). Ten user modes. See Appendix C-2.
Brightness Image brightness.
Contrast Image contrast.
Palette* Number of displayed colors. (Default=16.7 million)
Color** Color saturation.
Inverse* Inverse image displayed. (Default=off)
Sync* Manual synchronization (phase) or automatic adjustment using
Enter.
Tracking* Manual screen width (total pixel number/line) or automatic
adjustment using Enter.
Pixels* Image format. (For unscaled image use 800 x 600)
Option Projection Change image direction for back projection.
(Default=std.)
Lamp Mode Select lamp power: eco. (low): std.
(
Default = eco.)
Remote Turn remote control feature On/Off. (Default=On)
Auto Mode* Turn automatic mode detection On/Off. (Default=On)
Language Select menu display language. (Default=English)
Help Turn menu help text messages On/Off. (Default = On)
Lamp* Lamp life indicator. Green bar - lamp is good. Red bar - lamp
needs replacement
Sog* Sync-On-Green level. Only for Sync-On-Green mode.
<Sync Mode>* Change synchronization mode (separate, composite, Sog).
Hue** Color level for NTSC video.
NTSC** Default setting of NTSC image (scaled or unscaled)
Audio Volume Volume level.
Treble Treble setting.
Bass Bass setting.
Balance Left/right balance of speakers.
Audio Speakers On/Off. (Default = On)
Stereo Stereo sound On/Off. (Default = On)
<Audio assignment> Select audio-in channels (Audio-1/Audio-2) to speakers according
to video selection.
Audio-In 1: Data S-VHS S-VHS
Audio-In 2: Video Data Video
(Default=Data/Video)
<Video Mode> Select video source: Data, Video or S-VHS