3M MP8620 - Manual (Page 12)


3M 1997 3M

Multimedia Projector MP8620 11
5-3. Remote Control Button Functions
Press to switch the projector between Standby
mode (lamp off, fan off) and operation mode (lamp
on, fan on).
REVEAL Press REVEAL to cover the image on the screen
with a gray mask. Use the control stick to reveal the
image or press REVEAL again to return full screen
projection of image.
FREEZE Stores (freezes) the projected image. Press
FREEZE again to return the projection of the
current image.
MAGNIFY Press MAGNIFY to double the image size in
horizontal and vertical direction. The details of the
middle of the picture can be seen. Move the control
stick to displace the magnified area within the
image. Press the MAGNIFY key again to switch
back to normal presentation.
In Video mode, press MAGNIFY to switch between
scaled and unscaled representation. This is only for
NTSC video.
BLANK Removes projected image, white background.
Press again to return projection image.
TIMER When the key is operated the timer-window appears
in the lower part of the display. Repeated operation
of the key switches over to full image display of the
timer and back to data projection. The timer starts
with the last used adjustment. A new start value is
entered by operating the key ENTER and adjusting
the value with the control stick. Operating the
ENTER key again starts the timer. When the timer
has run down, the timer window blinks repeatedly.
POINTER Places a pointing device on the screen. Move
pointer by operating the control stick.
Brightness adjustment.
VIDEO Switches to video mode. When in video mode the
video source can be selected (Video or S-Video) by
pressing the key repeatedly.
Mute.
PC Switches to PC mode.
Volume adjustment.
MENU Start the On Screen Menu System for projector
adjustment.
Mouse emulation ON, stick controls the movement
of the pointing device.
Emulation OFF, stick centers image on screen.
8620-01A
L R
ENTER
ON/OFF
REVEAL
FREEZE
MAGNIFY
BLANK
TIMER
POINTER
MENU
VIDEO PC
Remote Button Description of Button Function
ON/OFF
Press ON/OFF to activate/deactivate mouse
emulation capability.
ON: The L and R buttons operate the left and right
mouse key functions. Drag-and-drop functions are
possible by simultaneous operation of the L/R
mouse key and control stick.
OFF: L button is the Enter confirmation key.
R button not used. Control stick centers image.
L / ENTER Mouse emulation ON, left mouse button.
Mouse emulation OFF, Enter button for confirmation
of a selection.
R Right mouse button, when mouse-emulation active.
Figure 5-3. Remote Control