3M MP8780 - Manual (Page 19)

3M ™ Multimedia Projector MP8780 © 3M 1999
ENGLISH
18
5.1 Cleaning the Air Filter
✔ Note
Clean the air filter about every 50 hours, if air is restricted due to dust accumulation on filter, the projector may
shut down due to overheating.
1. Turn off the MAIN POWER switch of the projector and pull out power cord. Let cool for 20 minutes.
2. Remove the air filter from the bottom of projector. Push down on tabs (1), open cover (2) and slide
cover off (3).
3. Turn cover over and carefully remove foam air filter screen (4).
4. Clean foam screen and metal screen using a vacuum cleaner.
5. Re-install air filter and replace air filter door.
Figure 5.1 Remove Air Filter
3
5 4
1
1
2
Section 5: Maintenance