3M Touch Monitor RS-232 - Manual (Page 10)

Overview 11
Explanation of Symbols
Attention: Read accompanying documentation
Important Notes:
• Plug power cord into appropriate power source.
• Plug power cord into a grounded receptacle.
• When unplugging power supply cord, pull on plug not cord.
• Do not connect or disconnect this product during an electrical storm.
• Install the display in a well-ventilated area. Always maintain adequate
ventilation to protect the display from overheating and to ensure
reliable and continued operation.
• Do not expose this display to direct sunlight or heat. Passive heat may
cause damage to the case and other parts.
• Do not install this display in areas where extreme vibrations may be
generated. For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit
picture discoloration or poor video quality.
• Ensure any metal enclosure does not contact the touch screen.
• Product weight varies from 25 to 50 pounds depending on the size of
your monitor, use caution when lifting.
• To avoid ergonomic concerns:
Do not install the monitor in a manner or location with awkward
accessibility.
Extended use may result in muscle, tendon, or fixed posture strains. It
is recommended you take periodic breaks from continuous use.
Service and Repair Indicators
Do not attempt to service this unit yourself. Removing the display
cover may expose you to dangerous voltage or other risks and will
void the warranty.
WARNING
To avoid the risk of fire which could result in serious injury or death:
• Do not remove the cover or back of the monitor.