3M Touch Monitor RS-232 - Manual (Page 20)

Chapter 1 Getting Started With Your CRT Desktop Monitor 21
These drivers and relevant technical documentation can be found on
the latest 3M Touch Solutions CD (19-640) and are also available
for download from our website at
www.3Mtouch.com . After the
software is installed, restart your computer to load and activate the
touch screen driver. To complete the setup of your touch monitor,
make sure you calibrate the touch screen.
Calibrating the Touch Screen
After you connect your touch monitor and install TouchWare, you
must calibrate the touch screen. Calibration serves two purposes:
• Sets the active area of the touch screen
• Aligns the touch screen’s active area to the underlying video
To calibrate the touch screen, open the touch screen control panel
and select Calibrate. Follow the directions displayed on the screen.
For more information on calibration, refer to the online help or the
TouchWare for Windows User Guide (P/N 19-224).