3M MP7640 - Manual (Page 16)

3M ™ Multimedia Projector MP7640 16 © 3M IPC 2000
Section 4: Adjustments and Functions
Menu Navigation
Factory Default Setting:
To reset a single item from SETUP menu:
1. Select the adjustment item (Bright, Contrast...).
2. Press the RESET button. Only the selected item
resets.
1. Press MENU disk button on projector or remote control MENU buttons.
On-screen menus are displayed on the projected image.
2. Select the menu to be adjusted using the MENU disk button or remote control Menu buttons .
Selected Menu is then highlighted.
3. Select the menu item to be adjusted using the MENU disk button or any of the remote control
Menu buttons .
Highlighted items may be adjusted.
✔ Note: Separate settings are provided for the VIDEO and RGB input terminals. Adjustments
are saved after shutdown.
Figure 4.3 Menu disk button on projector and Menu buttons from basic remote control transmitter
Figure 4.4 Default Settings
MENU
SELECT
BRIGHT
SETUP
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
INPUT IMAGE OPT.
Press MENU SELECT on the remote control to view the full menu or just the selected menu item. When only
the selected menu item is displayed, the other menu items are displayed by pressing the buttons.
BRIGHT