3M MP8610 - Manual (Page 29)


3M 1998 3M

Multimedia ProjectorMP8610 25
C-2. Factory Default Settings
The following table shows the possible settings of the projector. These settings can be restored by
pressing ENTER and the button on the control panel (backside of projector) when switching on the
main power of the projector.
The projector will start immediately and a message Parameter factory settings restored in the starting
picture will indicate the default settings are reset. The default settings of the projector are underlined.
Menu Submenu Possible Settings
Setup*/Picture** <Mode>* Five user Modes: User mode 1, User mode 2, ..., User mode 5
VGA Text 720 x 400
VGA 640 x 350, VGA 640 x 400, VGA 640 x 480
Mac LC 640 x 480
Mac 640 x 480
VESA 640 x 480 72 Hz, VESA 640x480 75 Hz
VESA 640 x 400 85 Hz, VESA 640x350 85 Hz
VESA 800 x 600 56 Hz, VESA 800x600 60 Hz
VESA 800 x 600 72 Hz, VESA 800x600 75 Hz
VESA 800 x 600 85 Hz, VESA 1024 x 768 43 Hz
VESA 1024 x 768 60 Hz, VESA 1024 x 768 70 Hz
Quadra 832x624
Brightness bar
Contrast bar
V. off.* bar
H. off* bar
Color ** bar
Inverse* on, off
Sync* bar
Tracking* automatic adjustment, manual entry of pixel number/line
Pix.* 640x350, 640x400, 720x400, 640x480, 800x600, 832x624,
1024x768
Option Projection std., , ,
Lamp Mode std., eco.
Remote on, off
Auto Mode* on, off
Language English, Français, Español, Italiana, Nederlands, Svenska, Deutsch
Help on, off
Lamp* bar
Sog* bar
Deinterlacing on, off
Reset Restore video modes to factory default settings
Std.** Auto/ PAL BGHI/ NTSC M/ SECAM/ NTSC 44/ PAL M/ PAL N/
PAL 60/ NTSC Comb
<Sync Mode>* Sep. TTL Sync, Sep. Ana. Sync, Comp. TTL Sync,
Comp. Ana. Sync, Sync on Green
Hue** bar
NTSC** full, centered
Audio Volume bar
Treble bar
Bass bar
Balance bar
Audio on, off
Stereo on, off
<Audio assignment> Data/Video, S-VHS/Data, S-VHS/Video
<Video Mode> Data, Video, S-VHS