Marksman Series X3 - Manual (Page 10)

10
+
C. Dual-Zone Shock Sensor
1. Light impacts to the vehicle will cause a pre-warning (warn-away) chirp from the siren or horn. These
light impacts will not set the alarm into full trigger even if they are repetitive.
2. Hard impacts to the vehicle will bypass the pre-warning indicator and activate a full alarm trigger.
D. Manual Arming “Lock”
1. Press the “Lock” button on the transmitter.
2. The siren will chirp once and the parking light will flash once indicating that the system is now armed.
The vehicle’s doors will lock upon arming if door lock control has been installed.
Silent Arming/Disarming: Press the “Lock” and “Unlock” button together on the transmitter to arm or
disarm you security system. No chirp sound will be heard, arm/disarm confirmation will be through the
vehicles parking lights only.
E. Automatic Arming
This X3 security system is equipped with an optional Automatic Arming feature, which allows the security
system to arm 30 seconds after the last door is closed.
Operation:
1. Turn the ignition to the “Off” position and exit the vehicle.
2. After all entrances are closed the security system’s LED will flash fast for 30 seconds. If you reopen any
protected entrance, the security system LED will stop flashing. It will begin flashing again once all the
protected vehicle’s entrances are closed.
3. After the 30-second timer has elapsed, the security system will automatically “Arm”. The siren will chirp
one time and the parking lights will flash one time.
Passive Door Locking: If the “Automatic Arming with Door Locks” feature has been programmed on, The
vehicle doors will automatically lock after the automatic arming cycle has been completed. (see Feature No.
2 on programming chart)
Button Function:
Transmitter Button Action System Function / Remark
Press and Release
Press and Release
Press Twice
Arm/Lock Doors
Progressive Car Finder (Functions 30 Seconds After Armed)
Arm/Lock Doors + Delete Shock Sensor (2nd Long Beep)
Press and Release Disarm/Un-Lock Doors
Press and Hold for 1.5 Seconds Channel 3 Activation (Release Trunk as Default)
Press and Hold Both Buttons
for 1 Second
Press Both Buttons Together Silent Arm/Disarm (Ignition Key is Off)
Activate Car-Jacking (Ignition Key Must be On)
Press and Hold for 3 Seconds
Press and Hold for Panic Mode On
Press and Release for Panic Mode Off
Press and Release Activate 2nd System operation
Owners Manual
(Continued)