3Com NBX 3101 - Manual (Page 37)

Telephone Buttons and Controls 37
■ Personal speed dial numbers
■ System-wide speed dial numbers
4 Soft buttons — Allow you to select items that are displayed in the
telephone display panel. See “More Ways to Dial a Call” in Chapter 7 .
The buttons, from left to right, are:
■ Slct (Select)
■ Back (returns you to the next higher level in the menu)
■
Exit (leaves the display panel menus)
5 Scroll buttons — Allow you to scroll through the items in the telephone
display panel. See “Using the NBX Telephone Display Panel” in Chapter 7 .
6 MSG (Message) button — Accesses your voice mail messages through
the NBX Messaging system. See “Listening to NBX Messages” in
Chapter 6 .
7 Telephone key pad
8 Volume control buttons — Raise or lower the volume of the ringer, the
handset, or the headset. See “Setting the Volume” in Chapter 7 .
9 Hold button — Places a caller on hold. See “Putting a Call on Hold” in
Chapter 7 .
10 Transfer button — (factory default setting) Sends the currently active
call to another telephone. See “Programmable Access Buttons” later in
this chapter.
11 Call Toggle button — (factory default setting) Similar to a Hold button,
enables you to switch between two calls. See “Programmable Access
Buttons” later in this chapter.
12 Feature button — (factory default setting) See “Programmable Access
Buttons” later in this chapter.