Janome Magnolia 7318 - Manual (Page 26)

24
q
w
e r
t
y
u
i
o
q
w
w
e
t
(A) (B)
q
r
z
x
!1
!2
!3
!4
!0
Zipper Application
Machine setting
q Stitch pattern: A
w Stitch width: 5
e Stitch length: 1.5 – 4
r Thread tension: 3 – 6
t Presser foot: Zipper foot E
Attaching the zipper foot
A: To sew the left side of the zipper, attach
zipper foot with the right side pin.
B: To sew the right side of zipper, attach the
zipper foot with the left side pin.
q Groove
w Pin
Fabric preparation
z Add 3/8˝ (1 cm) to the zipper size.
This is the overall opening size.
q Right side of the fabric
w 3/8˝ (1 cm)
e Opening size
r Zipper size
t Slider
y Zipper teeth
u Zipper tape
i Wrong side of the fabric
o End of the opening
x Place the right (top) sides of the fabric
together. Sew a bottom seam 5/8˝ (2 cm) from
the right edge to the zipper bottom stop
position. Sew a few stitches in reverse to lock.
Increase the stitch length to “4”, set needle
thread tension to “1”, and baste the entire
length of the fabric.
!0 5/8˝ (2 cm)
!1 Basting
!2 Reverse stitch
!3 End of the opening
!4 Bottom seam