Janome Magnolia 7318 - Manual (Page 35)

33
Replacing the Light Bulb
WARNING:
When replacing the bulb, switch off and unplug
the machine.
Wait for the light bulb to cool down before
touching it.
Remove the cap and screw. Remove the face
plate.
q Cap
w Screw
e Face plate
Push and turn the bulb counterclockwise to
remove it.
Push and turn the bulb clockwise to replace it.
r Light bulb
q
w
e
r
e
w
e
r
z
x
c
q
Replacing the Bobbin Holder
z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits
next to the stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Attach the needle plate, inserting the two
guide pins into the holes in the needle plate.
Tighten the screw firmly with the screwdriver.
e Guide holes
r Screw