321 Studios Muratec MFX-C2828 User Manual
Page 62
1-55
1.20
Loading paper
1
In
tr
od
uctio
n
Chapter 1
3
From the touch panel, select the paper type.
% Press [
] and [
] until the desired paper type appears.
% If label sheets are loaded, select [Thick 1].
% If non-standard-size paper is loaded, specify the Paper Size setting.
% For details on specifying the paper size and paper type settings, refer to chapter 5 of the [User’s
Guide Copy Operations].
% Printing on OHP transparencies is possible only in black.
Reference
-
Paper of the following types and amounts can be loaded into the bypass tray.
Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m
2
to 90 g/m
2
)): Up to 150 sheets
Thick paper 1 (24-3/16 lb to 39-7/8 lb (91 g/m
2
to 150 g/m
2
)): Up to 20 sheets
Thick paper 2 (40-3/16 lb to 55-5/8 lb (151 g/m
2
to 209 g/m
2
)): Up to 20 sheets
Thick paper 3 (55-7/8 lb to 68-1/8 lb (210 g/m
2
to 256 g/m
2
)): Up to 20 sheets
Thick paper 4 (68-3/8 lb to 72-1/16 lb (257 g/m
2
to 271 g/m
2
)): Up to 20 sheets
OHP transparencies: Up to 20 sheets
Envelopes: Up to 10
Label sheets: Up to 20 sheets
Banner paper (127 g/m
2
to 210 g/m
2
(33-13/16 lb to 55-7/8 lb))
*1
: Up to 10 sheet
You can load user paper with the settings of this machine. For details, contact your service
representative.
*
1
Banner paper can be specified when using the print function.
Width: 8-1/4 inches to 11-11/16 inches (210 mm to 297 mm);
Length: 18 inches to 47-1/4 inches (457.3 mm to 1,200 mm)
-
Paper of the following sizes can be specified for the bypass tray.
Standard-sized paper: 12-1/4 × 18 w, 12 × 18 w to 5-1/2 × 8-1/2 w/v, A3 w to B6 w, A6 w, 8 × 13
w
*1
, 16K w/v, 8K w
Non-standard-sized paper: Width: 3-9/16 inches to 12-1/4 inches (90 mm to 311.1 mm); Length: 5-1/2
inches to 47-1/4 inches (139.7 mm to 1,200 mm)
*1
There are six Foolscap sizes: 8-1/2×13-1/2 w,8-1/2 × 13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w, 220 ×
330 mm w and 8 × 13 w. Any one of these sizes can be selected. For details, contact your service
representative.
d
Reference
For details, refer to chapter 8 of the [User’s Guide Copy Operations].