321 Studios Muratec MFX-C2828 - Manual (Page 82)

1-75
1.22 Replacing consumables 1
In
tr
od
uctio
n
Chapter 1
Replacing the staple cartridge (Finisher FS-529)
The following procedure describes how to replace the staple cartridge for finisher FS-529.
This illustration shows an example where the optional finisher FS-529 is installed.
NOTICE
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge
is removed before the message is displayed, it will result in a failure.
Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is
replaced.