Nokia 321 Studios User Manual
User’s guide
Advertising
Table of contents
Document Outline
- User’s guide
- For your safety
- Contents
- Introduction
- Getting started
- Installing the camera
- 1. Lift up the back lid of the camera and insert a SIM card as shown in Figure 3.
- 2. If you configure the camera settings with PC Suite, connect the serial data cable to the data ...
- 3. Attach the power source to the power connector of the camera and plug it into a mains outlet. ...
- 4. Configure the camera settings either with PC Suite or with SMS commands, see Configuring the s...
- 5. After completing the configuration, disconnect the serial data cable, and power off the camera...
- 6. Attach the camera to the desktop stand with the screw, turn the stand to the usage position an...
- 7. Power on the camera.
- Installing the PC Suite software
- 1. Exit all Windows programs. Insert the CD-ROM into the CD-ROM drive of your computer.
- 2. If the CD-ROM is not launched automatically, go to your CD-ROM drive (e.g. drive D) and double...
- 3. Select the language for the installation program and software.
- 4. The Welcome page of the installation wizard opens. Click Next to continue.
- 5. Read through the Nokia license agreement. If you do not accept the license agreement, click No...
- 6. Enter your name and the name of your company. Click Next.
- 7. Select the destination folder for the software. The default folder is C:\Program Files\Nokia\N...
- 8. Select the program folder for the software and click Next.
- 9. Check the installation settings. To accept them, click Next. To change the settings, click Bac...
- 10. The Completion page informs you when the installation is completed. Remove the CD-ROM from th...
- Configuring the settings with PC Suite
- 1. To access PC Suite, go to Start, select Programs, and select Nokia Observation Camera.
- 2. Plug the serial data cable into the data connector of the Nokia Observation Camera and the COM...
- 3. When the PC is connected to the camera, you are asked for your security code. The preset code ...
- 4. If the PIN code request is active on your SIM card, you will be prompted to enter the PIN code...
- 5. When PC Suite asks whether you want to import the camera settings to PC Suite, click Yes.
- Main page
- Settings page
- Users page
- Monitor page
- Security settings
- Saving the PC Suite settings
- Configuring the settings with SMS
- Taking the camera in use with SMS commands
- 1. Set the language for the camera by sending the SMS command 21_security code_number of language...
- 2. Set yourself as the master user of the camera by sending the SMS command 8_security code_user ...
- 3. Set the name for the camera by sending the SMS command 25_camera name to the camera. Replace c...
- 4. If your service provider supports over-the-air MMS configuration, send the message 91_service ...
- General commands
- Automatic imaging commands
- Thermometer commands
- Connection commands
- User commands
- Security commands
- Taking the camera in use with SMS commands
- Light indicators
- Installing the camera
- Using the camera
- Care and maintenance
- Important safety information
- Technical specifications