Nokia 321 Studios - Manual (Page 19)

Copyright ©2003 Nokia. All rights reserved.
Getting started
13
Getting started
Note: If you set the resolution of images to High on the General settings tab, you can only
receive one motion detection image in a message. If you set the resolution to Normal, you can
receive two images. If you set the resolution to Compact, you can receive three images.
Timed imaging: check this box if you want the camera to send you images at certain intervals.
Interval for image sending: set the interval for sending timed images.
Number of sent images: set the number of images (0-10) to be captured using timed imaging before
the timed imaging function is turned off. If you set 0 as the number of images, timed imaging remains
on until you turn it off.
When you have made the necessary changes, click Apply to use the new settings.
Thermometer tab
Note: Turn the thermometer up before using it. Do not use force. See Figure 2 on page 5.
Scale: select whether to use Celsius or Fahrenheit as the temperature scale.
Read temperature: click this button to check the current temperature in the camera premises.
Temperature limits: set the minimum and maximum limits for the temperature. You can then set the
camera to send you a notification when either of the limits has been reached. See below.
Send SMS when limit reached: you can set the camera to send you an SMS notification when the
minimum or the maximum temperature is reached.
Note: After the camera has sent you a notification on the reached temperature, you need to set
the temperature limits again, if you want to continue using this function.