3Com WL-603 - Manual (Page 122)

120 C HAPTER 5: C ONFIGURING THE R OUTER
5 Select the Local Party ID, and then enter the ID, Network Address and
Subnet Mask of the Local Secure Group. The network address of the local
secure group is usually the network address of the local network.
6 From the Key Management drop-down menu, select either IKE Main
Mode or IKE Aggressive Mode.
7 SA (Security Association) attribute - select the option to use for SA
attribute.
8 In the Pre-shared Key field, enter the password for the connection. This
must be unique for each connection rule that you create.
9 Select MD5, or SHA1 from the Authentication Algorithm drop-down
menu. Both ends of the connection must use the same value.
10 Select DES, 3DES, Null, AES-128, AES-192, or AES-256 from the Encrypt
Algorithm drop-down menu. Both ends of the connection must use the
same value.
11 Enter the Key lifetime, in seconds. The default is 3600 seconds. The value
must be at least 300 seconds.
12 PFS - Perfect Forward Secrecy, check this box, then the Diffie-Hellman
Group options become available. The use o PFS is optional, enabling PFS
will add another layer of encryption security.
13 Diffie-Hellman Group - select the group to use for Diffie-Hellman key
exchange.
14 Check the IKE Keep Alive box to enable this function. The time value is
the number of seconds that the router waits between sending IKE
keepalive packets.
15 Click Apply.