Hyundai H-CMD7086 - Manual (Page 16)

16
Setting other characteristics
During TUNER mode press SEL button and hold for 2 seconds, shortly and repeatedly press SEL button to
select the setting:
TA SEEK => PI MUTE => RETUNE L => MASK DPI =>TA VOL => EON TA => DISP
REV => BEEP. To adjust the selected setting, rotate VOL knob or press VOL+/- buttons on the RC.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM
mode, no TA/TP is displayed and the alarm is set off. After choosing, please leave the unit idle to activate.
PI SOUND/MUTE
PI SOUND refers to the reception noise when the AF function tries to scan alternative frequency.
RETUNE S/L - SHORT/LONG
RETUNE refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a
time period of 30 seconds and “L” represents a time period of 90 seconds.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode;
during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field
strength.
TA VOLUME:
Rotate the knob or press VOL+/- button to choose the volume level of TA announcements.
EON TA: Rotate the knob to select EON TA LO/EON TA DX mode. If you want to receive information from
local stations only, select EON LO mode. Otherwise, select EON TA DX mode.
BEEP
Turn BEEP on if you want the pressing of buttons to be sounded. Press SEL Button until the display shows
BEEP, then use the VOL+/- Button to turn BEEP sound ALL or OFF or 2ND (you hear BEEP sound when you
press and hold a button).
DISP REV: Rotate the knob to select LED display color between black and white.