Hyundai H-CMD7086 - Manual (Page 35)

35
Call list/number redial
Short press ACCEPT CALL button once, the LCD screen will blink with “_” first, press it again to display the
last number, then press NEXT/PREV button to display all incoming and outgoing numbers one by one. Press
SEL button on panel or LEFT cursor button on the RC to delete a wrong number (max. 12).
Note: While scrolling the numbers you can press ACCEPT CALL”
” button to redial any from the list. The
functionality may be limited due to some phones' own dedicated interfacing specification.
A2DP (Advance Audio Distribution Profile)
A2DP is a function which can receive the audio frequency signal from mobile phone, amplify by car audio and
play out by speaker.
Operation:
Enter Bluetooth music playing program via connect mobile phone (no need to connect if the unit already
connected with phone) via play music.
Note: A2DP need mobile phone support.
AVRCP
When the music is playing, Press PLAY/PAUSE button once to pause, press again to play. Press NEXT button
to the next song, press PREVIOUS button to the previous song. Press VOL+/- buttons to adjust volume.
Auto-connect
When power on, the last paired phone will be connected to the device via Bluetooth automatically, after
searching about one minute, if the device can not find the paired phone, it will stop searching.
When in standby mode (unconnected), short press ACCEPT CALL”
” button to active auto-connect function
and the device will search the last paired phone.