User manual – Edimax Technology ES-5224RS+ User Manual
Page 49
User Manual
Publication date: July, 2006
Revision A2
43
Function name:
Tag-based VLAN
Function description:
It shows the existed information of VLAN Groups List and maintains them, i.e.
modify and delete one of them. User also can add a new VLAN group by
inputting a new VLAN name and VLAN ID.
If you are in tag-based VLAN, it will show the VID and Member of the existed
tag-based VLAN group. You can easily create and delete a VLAN group by
selecting <Create New VLAN> in VLAN ID list and pressing <Remove This
VLAN> function buttons respectively.
Fig. 3-13
Parameter description:
VID(VLAN ID):
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.
Member:
This is used to enable or disable if a port is a member of the new added
VLAN. “T” and “U” represents that they are members belonging to this
VLAN. “T” means frames with this VID outgoing from this port will be
tagged, “U” means frames with this VID outgoing from this port will not
be tagged instead. Click the icon under each port to change the member
state. If you would like to set up all ports at a time, user is also allowed to
click the icon under “All” to simplify the procedure of configuration.